SiamMaster - GDIS 2-6 URAL/KAMAZ
Сontact us: siamsales@integra.ru
Features
- electric-driven pulling-and-running and electronic control mechanism «SIAM-LESP-6». Power supply is from three-phase industrial network 380 V, 50 hz;
- self-contained power supply of the pulling-and-running mechanism is a synchronous generator driven by additional engine pto providing complete independence of operation;
- AC frequency changer provides infinitely variable speed control of lowering slickline from 7% to nominal;
- change in direction of slickline movements is made by changing rotating direction of a motor shaft - electronic reverse;
- running depth gauge MI-1 doesn’t have a measuring wheel (excluding redundant slickline strain);
- free fall is provided by a belt brake of a drum;
- 2 speed rates (differ in speed by three times) : power or fast. Gears are changed in complete stop and full braking;
- speed, running depth and pulling force is controlled by an electronic meter. The running depth control is duplicated by a mechanical meter;
- there are 2 working areas cabined off with a watch window in the vehicle: an engineering compartment and operator control room. There is a small size door between these rooms. Slickline is run through rear locker doors;
- to light the wellhead and slickline winch, 220 V line-operated spotlamps are installed;
- there is an amplified telephone;
- to improve working conditions, the following equipment is installed: a washstand with a water heater, a wardrobe, sleeping berths, a chest, an operator seat and so on (optional);
- it is equipped with a hoisting device to change a drum (optional);
Specifications
| Slickline diameter | 1.8-2.5 mm |
| Empty drum traction force, in first gear | not less than 8 600 N |
| Empty drum traction force, in second gear | not less than 2 800 N |
| Empty drum winding speed in first gear | From 110 to 1400 m/h |
| Empty drum winding speed in second gear | from 350 to 1400 m/h |
| Full drum winding speed in first gear | from 170 to 2000 m/h |
| Full drum winding speed in second gear | from 500 to 6000 m/h |
| Drum capacity for slickline 1.8 mm | 6000 m |
| Drum capacity for slickline 2.5 mm | 5000 m |
| Drum mounting type | adjustable |
| Induction drum motor | 4.0 kW (3 phases 380V) |
| Induction spooler motor | 0.12 kW (3 phases 380V) |
| Transducer power output | 2.2 kW |
| Lab power supply: synchronous generator from additional engine pto | 380 V, 3 phases, 50 hz |
| Operating temperature range for engineering compartment equipment | From –40 °С to +50 °С |
| Operating temperature range for electronic equipment of control room | from –1 °С to +40 °С |
| Lab life cycle | 10 years |
Documents
Leaflet
